The Mini rodd has a 1/4" shaft and works well with any variable speed drill. The Midi, Heavy Duty and Commerical Super Duty rodds have 5/16" shafts and should be used with a heavy duty, 0-800 rpm drill with an 8 to 12 amp motor.


4. What is the best way to use my Rapid Rodd?

Insert the Rapid Rodd to the bottom of the container and start with a slow speed. Gradually increase speed until optimum mixing occurs. Most materials are thoroughly blended within 5 seconds. For materials such as concrete mix, thinset or grouts, fill the mixing container only half full.


5. Is the Rapid Rodd easy to clean?

YES! The stainless steel Rapid Rodd can be cleaned hands free by immersing it in water or other cleaning media for a few seconds. Or, simply wipe with a paper towel or a cloth rag.


6. Is Rapid Rodd safe to use?

Rapid Rodd has no sharp edges but the precautions on the packaging such as the use of safety glasses should be followed.


7. How does Rapid Rodd compare to other mixers and blenders?

We believe the patented Rapid Rodd outperforms ALL other mixers. Rapid Rodd blends faster and more thoroughly than any other mixer we've tested. Rapid Rodd cleans the bottom and sides of the mixing container and mixes in both forward and reverse directions.